/2000w-512kwh-wall-mounted-hybrid-solar-power-system-1f9c4f8c-800x800.png "2000W 5.12KWh Wall Mounted Hybrid Solar Power system")
/-1f9c4f8c-55x55.png?v=20241121)
/-49891a52-55x55.jpg?v=20241121)
/-13b853b7-55x55.jpg?v=20241121)
2000W 5.12KWh Wall Mounted Hybrid Solar Power system
- Wall mounted;
- Lithium iron phosphate battery 5.12KWh;
- Pure sine wave;
- Long cycle life;
Product Details
|
Lithium battery pack technical specification 5.12KWh wall mounted battery module |
|
| Model | LANE-ESS48-2200V |
| Nominal capacity | 25.6V/200Ah |
| Energy | 5120Wh |
| Load voltage | ≥20V |
| Internal impedance | ≤20mΩ |
| Charge voltage | 29.2V |
| Standard charging voltage | 100A |
| Max. charging voltage |
100A |
|
Standard discharging voltage |
100A |
|
Max. discharging voltage |
120A |
| Discharge cut-off voltage | 20V |
| Operating temperature | charge: 10~45℃ |
| discharge: -20~60℃ | |
| Storage temperature | -20℃~60℃ less than one month |
|
-20℃~30℃ less than six months |
|
| Weak-current switch | ON/OFF |
| Communications | RS485 |
| Machine net weight | about 54.5Kg |
| Dimensions(L*W*H)mm | 475*155*662 (not including the hanging panel) |
| Carton size(L*W*H)mm | 760*570*260 |
|
|
|
|
Inverter technical specification |
|
| Model | HS-2200 |
| Input | 110VAC (standard) |
| Input voltage range | 110~123VAC ±3V(Normal) ; 110~120VAC ±3V(UPS) |
| Frequency | 50/60Hz ±5% |
| Rated output power | 2000W |
| Output voltage at mains supply | Output voltage at mains supply is the same as the input voltage(110V±10% with AVR function) |
|
Output frequency at mains supply |
The output frequency at mains supply is the same as the input frequency |
| Output voltage under inverter | 110VAC±10% |
|
Output frequency under inverter |
50/60Hz ±1% |
|
Output wave under inverter |
Pure sine wave |
| Battery type | LiFePo4 battery |
| Battery voltage | 24VDC |
| Battery charging voltage |
28.8VDC |
| Max. PV array power | 24V:1600W |
| Solar input voltage range |
24V: MPPT 30V~150VDC |
| Max. PV display open circuit voltage |
24V: MPPT 150VDC |
|
Optimum Vmp working range |
24V: MPPT 30V~105VDC |
| Max. Solar charging current | 60A |
| Max. AC charging current | 15A |
| Battery charging voltage range | 142VAC |
| Conversion time | ≤10ms(UPS)/≤20ms(INV) |
| Peak load ratio | (MAX)3:1 |
| Standby power consumption | 15W |
| Protection functions | Under mains supply: input over-current protector |
| Status display | The page turn button allows you to view parameters such as AC voltage, AC frequency, PV voltage, PV current, output voltage, output frequency, battery voltage, load current, etc. |
| Sound tips | Low battery protection buzzer sounds long |
| Low battery buzzer with one second beep | |
|
overload buzzer sounds long |
|
| The buzzer with an overload of less than 130% rings per second, and the output is turned off after 30S, and the output is turned off after 300mS when the overload is greater than 150% | |
| Machine faliure buzzer long beep | |
| Operating temperature |
0℃~40℃ |
|
Storage temperature |
-15℃~45℃ |
|
Relative temperature |
-10℃~90℃ No condensation |
| Noise | ＜45dB |
| Machine dimensions(L*W*H)mm | 512*320*136 |
|
Carton size(L*W*H)mm |
552*385*193 |
|
Machine net weight |
about 15.49Kg |
Inquiry Now
Can't find the specific information you’re looking for? Have a question ? Contact Us
/10kva-1065kwh-all-one-solar-inverter-charging-system-de765d19-300x225.jpg?v=20241121 "10KVA 10.65KWh All-in-one Solar Inverter EV charging System")
/2000w-portable-power-station-090e3805-300x225.jpg?v=20241121 "2000W Portable Power Station")
/solar-parasol-mobile-power-station-fc2bc2db-300x225.jpg?v=20241121 "Solar Parasol Mobile Power Station")